Obitsuroid Neck Kit Development Version 44, Set of 2, with Instructions
If this quantity is acceptable, you can purchase it immediately.If you would like a different quantity, please inquire.The shipping cost will be cheaper if you buy a large quantity.(The shipping cost doesn't change much unless the quantity is truly large.)By making the connecting part in the middle a sphere, the head can now tilt and nod 360 degrees.When attached, it is completely invisible from the outside, but the color is slightly darker than Whity.Please be aware of this.This is a development version of a neck kit that connects an Obitsu 11 body and a Nendoroid head.Each one has been inspected to ensure it doesn't fall out.Remove the neck joint from the Nendoroid and replace it with this kit.(You will need to open the upper body of the Obitsu 11 body.)No modification is required="required" for this product itself.It can also be used with Nendoroids before the 300 series, which have a separate joint.For Nendoroids from the 300 series onwards, please use it by inserting it into the joint that comes standard with the Nendoroid. (You will need to remove the shaft that is attached to the default joint.)It won't fall out even if you turn it upside down.You will receive only the two kits shown in the first photo. The other items are not included.